Masc

HISTORY/ PRODUCTION

MASC makes market innovation, following this motto we develop together with the craft industry and specialst dealers equipment, tools, and building products for simplifying processes of trade since 1991.

For twenty years we have been doing our best to match our products, our services and our innovations with your satisfaction. To us it is important what you think of our company and our products! We distribute our products exclusively via specialist dealers and have established a network of dealers across germany, europe and the whole of the world over the past years.
IDEAL TIN SNIP



Stubai Quality Tin Snip with lasered dimmensions on the cutting edges in mm. Top and Bottom marked Graduation.

Description Article NR. Size Weight
Ideal tin snip left 30010 285mm 600g
Ideal tin snip right 30020 285mm 600g
METAL NIPPER



For cutting sheetmetal profiles before folding for binding bends. avoids tearing of the sheetmetal. No hole punching, spot drilling or additional cutting required, cutting depth adjustable.

Description Article NR. Size weight
Metal nipper 30030 230 x 14 x 50mm 600g
SEAMING HAMMER



Seaming hammer with offset shaft to avoid hand injuries, no sheetmatel surface damage due tot he impact angle and PVC head.

Description Article NR. Size Weight
Seaming hammer 30040 350 x 160 x 90mm 700g
CROSSHAMMER PVC



For gentle forming of the sheet metal.
Ideal for working on all sensitive materials.


Description Article NR. Hammerheadwi. length weight
Crosshammer PVC 30050 90mm 275mm 300g
HOLE PUNCTURE PLIER



Hand held Puncture Plier for soffit vents, eave sheets and angle flashing connector sheets.Saves renailing because of expansion mechanism, no nailing plates necessary. The punched material is ejected through a spring system.
Slot hole dimensions are 14mm long by 3mm wide and an adjustable dephtset from 9-21mm.

Description Article NR. Size Weight
Hole puncture plier 30060 235 x 64 x 33mm 500g
ROOFER SQUARE



For fine and coarse metal sheets.
Galvanized steel angle with specially flat stop.
Precise application of all sheets on workbench and workshop floors.
Non slipping, by precise application on the sheet metal.

Description Article NR. Size weight
Roofer square small 30070 350 x 180 mm 600g
Roofer square medium 30071 600 x 330 mm 1000g
Roofer square large 30072 1050 x 500 mm 2000g
PLUMERS STEEL SQUARE



Galvanized square with lasered degree and measurment marking.

Description Article NR. Size Weight
Plumers steel square 30075 250mm 500g
ASSYMETRICAL PLIER



Combination Plier with Hammer- Pulling- and Pincingfunction. Excellent leverage, The assymetrical form assists perfectly by closing the spring on guttersystems.

Description Article NR. Size Weight
Assymetrical plier 30080 250 x 55 mm 600g
QUICK GRIP PLIERS



One piece gutter grip plier, single hand function, easy operating oft he quick bracing mechanism, steady bracing before soldering and riveting work on gutters or gutter connections. Perfect advantage of capillary pressure.

Description Article NR. Size Weight
Quick Grip pliers 30090 28/7 tlg 1200g
Quick Grip pliers 30091 33/6 tlg 1400g
METAL CORD UNCOILER



Metal cord uncoiler for a fast and clean winding and unwinding without any knotting of guttercords. Made from steel, powdercoated. Flat side prefent rolling away.

Description Article NR. Size Weight
Metal cord uncoiler 30100 220 x 100mm 500g
SPECIAL GUTTERCORD



New design with a special inlay guarantees no sagging by dampness.
Tear proof, firm weave.
Cord is designed in bright colour for easy detection. Non stretching.

Description Article NR. Size Weight
Special guttercord orange 30101 1,5mm x 75m 90g
Special guttercord green 30102 1,5mm x 75m 90g
GUTTERCORD WATERLEVEL



For a fast and precise levelling of gradiants by gutter assembley.

Description Article NR. Size
Guttercord waterlevel 30105 79 x 12 mm
ROOFTILEMARKER



For perfect marking of the ROOFTILE Profile onto the Sheet Metal Flashings.

Description Article NR. Weight
Rooftitlemarker 30110 15g
SOLDERING FLUID BOTTLE WITH SPILL STOP



No spilling out of soldering fluids on the roof when the bottle gets dropped or knocked over.

description Article NR. Size Weight
Soldering fluid bottle blue with spill stop 30120 65 x 65 x 95mm 5g
Soldering fluid bottle yellow with spill stop 30121 65 x 65 x 95mm 5g
Soldering fluid pencil 30122 9mm /
TROLLEY AND SHEET METAL ROLL HOLDER



Trolley
  • Carriage and uncoiling device for Metalrolls up to 200kg or 450 lb


    • Sheet metal roll holder with guide rollers
  • easy carriage of sheet rolls and coiled metals
  • no coil slipping during transport
  • easy glideing during uncoiling process
  • stabil and controlled sheet feed


    • Description Article NR. Size Weight
    Trolley up to 100cm range 30130 1500 x 500 x 300mm 24kg
    Metal roll holder with guide Rollers 30131 1000 x 150mm 28kg
    TRAPEZOID PROFILE HOLEPUNCH PLIER



    For trapezoid sheets up to 1,2mm thickness with depth stop adjustable from 35 to 105mm.
    Tempered 10mm punch pins with compressed ejection springs guaranteeing a straight suspension alignment.

    Description Article NR. Size Weight
    Trapezoid profile holepunch plier 30140 700 x 160 x 50mm 2400g
    COMPRESSION AND STRECHING DEVICE



    Compressing and Streching in one Toolt
  • Simple replacement on insets
  • Universal useage in the workshop and on side
  • For rounded sills and dormers profiles
  • Supplied with a lever for manual use on the roof


    • Description Article NR. Size Weight
    Compression and streching device comlete, 5-45mm, up to 1mm steel sheet 30150 150 x 140mm 5400g
    Metal stand SSW 30151 730 x 200 x 200mm 8300g
    Operating arm SSW 30152 560 x 15mm 1500g
    Stretching insert 30153 / 500g
    Stretching insert 30154 / 500g
    SPECIAL EXPANSION DEVICE FOR DOWNPIPES



  • Easy expansion of all commercial downpipes (folded, welded ...) of Zinc and Copper, Aluminum and Uginox metals.
  • Easy manufacture of sliding sleeves
  • Trough the patented transmission shift, is an automatic feed and return guaranteed
  • Alignment of rain pipe arch / bends possible


    • Adapter SDS
  • Compatible with any rotary hammer or cordless drill with SDS gear. Light weight through aluminium construction, durable.


    • DESCRIPTION Article NR. size weight
    Special expansion device for downwipes 50mm 30160 170 x 50mm 650g
    Special expansion device for downwipes 60mm 30161 170 x 60mm 750g
    Special expansion device for downwipes 75mm 30162 170 x 75mm 1000g
    Special expansion device for downwipes76mm 30163 170 x 76mm 1050g
    Special expansion device for downwipes 80mm 30164 170 x 80mm 1150g
    Special expansion device for downwipes 87mm 30165 170 x 87mm 1400g
    Special expansion device for downwipes 100mm 30166 170 x 100mm 1750g
    Special expansion device for downwipes 120mm 30167 170 x 120mm 2300g
    Special expansion device for downwipes 130mm 30168 170 x 130mm 2900g
    Special expansion device for downwipes 150mm 30169 170 x 150mm 3350g
    Adapter SDS 30170 / 150g
    Suitcase empty 30172 350 x 350 x 350mm 3650g
    SHEETMETAL LEFTOVR CLAMP



  • V2A tension clamp
  • Eyelet for storage or hanging option
  • Usable as a soldering clip clamp
  • Clamps all left over sheetmaterials


    • description Article NR. size weight
    Sheetmetal leftover clamp 30180 120 x 40mm 160g